Mud cleaner in drilling mud solids control system is the
integrative equipment. Combined with desander cone,
desilter cone and the finer screen panel. It is rather compact and
high efficiency. The bottom shaker is flexible on vibration mode.
The linear motion, the BEM, or the unbalanced elliptical motion.
The flow rate the capacity is custom built item. We can select any
numbers of cone to set up hydrocyclone part. This is decided by
whole drilling mud circulation system.
During operatin, we'll pump drilling fluid into desander inlet pipe
for desander separator separation. Then we pump clean drilling
fluid from desander compartment to desilter cone, after that,
submersible slurry pump or screw pump will transfer drilling mud to
decanter centrifuge to get rid of 2~7 microns cuttings or fine
Features Of AIPU Mud Cleaner
- Shale Shaker & Desander & Desilter 3 in one mud cleaner for 2nd and 3rd phase cleaning for small footprint.
- Both desander & desilter cone material is polyurethane (PU) for
- Italy brand motor, standard brand is OLI, Martin or Itvibras motor
- Max G force reaches to 7.5G, G force adjustable depending on
drilling mud conditions
- Heat treatment of shaker deck for steady working, Stainless
Material for shaker deck bottom
- Heavy anticorrosive painting on shaker service, 3 layer painting.
- Wedge type screen and hook strip screen both available to suit
- Mechanical deck angle adjustment for steady and reliable
- Standard options: IECEX, ATEX, UL, DGMS, CE, Gost.
- Top brand of electrical control panel, Siemens/Scheneider brand
- Composite material screen available for longer service life.
- Shaker screen is sent to US for API RP 13C compliance test. The
only one supplier in China with API RP 13C compliance test report.
Mud Cleaner Technical Parameters
|Model||Hunter 50||Hunter 90||Hunter 120||Hunter 200||Hunter 240||Hunter 320|
|Desander Size||8 inch||10 inch|
|Desander Qty||1 Pcs||2 Pcs||3 Pcs|
|Desilter Size||4 inch|
|Desilter Qty||4 Pcs||6 Pcs||8 Pcs||10 Pcs||12 Pcs||16 Pcs|
|Work Pressure||0.25~0.45 MPa|
|Bottom Shaker||Model||Hunter Mini||Hunter D3||Hunter MG4|
|Vibration Mode||Linear Motion|
|Deck Angle||2°||-1 - +5°|
|Screen Panel||2 Pcs||3 Pcs||4 Pcs|
|Remark||4" cone =12~15m³/h, 8"cone=30~35m³/h,10"cone=90~120m³/h. It can be
configured according to clients' demand|