Drilling fluid process Centrifugal pump is used to transport fluid by conversion of
rotational kinetic energy to the hydraulic energy of the fluids
flow. The rotational energy typically comes from an engine or
electric motor. Aipu supply pumps driven by 10HP to 100HP, which
are popular in drilling mud process. Pumps size are 3x2, 4x3, 5x4,
6x5, 8x6. They will perform differently under different power,
voltage, or frequency.
No matter for oil and gas drilling, or Water drilling, CBM, or
piling, and so on. The solids control system need pump to be power
or energy supply of fluid circulation or mud recycling. From shaker
compartment, we use pump to transfer drilling mud to desander or
mud cleaner. From mixing tank we need mixing hopper pump to blend
or compound new drilling fluid
Drilling mud solids control Centrifugal pumps used in well drilling
fluids system are mechanical seal pump. Aipu produce high quality
centrifugal pumps. Centrifugal pump is also called sand pump, as
the dilling fluid to be processed contain large quantity drilled
solid or cuttings.
Features Of AIPU Centrifugal Pump
- 1. Durable mechanical seal made of tungsten carbide alloy.
- 2.FAG, SKF or other top brand bearings.
- 3.SOG oil seal.
- 4.Interchangeable with a famous pump.
- 5. Less maintenance cost.
- 6.Compact and small footprint
How To Choose Centrifugal Pump
- Mudflow: According to whole mud system flow rate or mud pump flow.
- Type: Vertical type or horizontal type.
- Motor: 50Hz or 60Hz, motor speed.
- Application: Mixing pump or feed pump
|APSB8x6-14||320 m3/h||40 m||75KW||1480 rpm||65%|
|APSB8x6-13||240 m3/h||33 m||55KW||1480 rpm||64%|
|APSB8x6-12||200 m3/h||33m||45KW||1480 rpm||64%|
|APSB6x5-13||180 m3/h||34 m||45KW||1470 rpm||60%|
|APSB6x5-12||160 m3/h||30 m||37KW||1470 rpm||60%|
|APSB6x5-11||120 m3/h||21 m||30KW||1470 rpm||62%|
|APSB5x4-12||90 m3/h||30 m||22KW||1460 rpm||56%|
|APSB4x3-13||50 m3/h||40 m||15KW||1460 rpm||48%|
|APSB4x3-12||45 m3/h||30 m||11KW||1460 rpm||47%|
|APSB3x2-12||23 m3/h||29 m||7.5KW||1450 rpm||39%|